Selens 55" Monitor Mounting System

The 55'' Monitor Mounting System, designed for the 55'' Selens Cart Workstation system, allows you to mount two monitors onto the cart—perfect for on-set monitoring and mobility.

The monitor arms feature a dual-section swivel design for left-right rotation and are secured with twist-lock knobs. The VESA plates offer adjustable tilt, and a magnetic hex wrench is included on the side for easy reinforcement.

The M28 (1-1/8'') rod with a 5/8'' baby pin, ideal for mounting transmitters, monitors, and other accessories.

Monitor Rods Length: about 54.8'' (1393mm) – freely adjustable to set the desired arm width.

The VESA plates are also compatible with the Selens Quick Release Monitor Mount Plate for fast and secure monitor attachment and removal.

?

Installation Steps:
1.Install two M28 (1-1/8'') rods (rod diameter: 35mm) into the cart's anti-rotation holes.
2.Mount the Monitor Rod Clamps onto the M28 rods.
3.Install two Monitor Rods, making sure they are level on both sides.
4.Attach two Monitor Arm Mounting Clips to the Monitor Rods.
5.Mount the Monitor Arms, aligning their base with the baby pin on the Mounting Clips.
6.Hang your monitors (use with the Selens Quick Release Monitor Mount Plate for quick setup/removal).

Precautions:
1.Before hanging the monitors, please tighten the tilt adjustment screw using the included hex key to prevent sudden drops and damage.
2.To remove the VESA plate, loosen the locking screw, then press and hold the release button to detach.

Key Features:
•Mount Two Monitors on Selens Cart Workstation
•Dual-section arm
•VESA plate (75mm & 100mm) with adjustable tilt
•35mm (1.378'') rod with a 5/8'' baby pin
•Safety release button for double security