Wisycom MCR54 B12

MCR54 is a camera quadruple true diversity wireless microphone receiver system in a modular stand alone or slot in configuration. It’s compatible with most camera’s slots and “multi-slot” mixer accessories.

MAIN FEATURES:

• Four channels True Diversity receiver (8 Receiver boards!)
• Exceptional compactness and high robustness
• DSP Analogue & Digital Audio Output (AES3)
• Up to 790 MHz bandwidth in 470/1260 MHz range
• Next Gen Multiband front-end filtering:
  • High Q electronically tunable filter in 470-800 MHz
  • 1st narrowband filter
  • 2nd narrowband filter
• Wideband and Narrowband DSP-FM operation (SW selectable):
  • Narrowband allows more 50% band efficiency
  • Narrowband allows about 3dB extra sensitivity and noise immunity
• Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
• High contrast OLED display
• Automatic scan & transmitter programming through infrared and Bluetooth 5 long range
• DSP based for extreme flexibility and multi-companding operations
• Monitor & control through USB C or Bluetooth 5 (long range) on Wisycom Manager 2.0 (computer SW)
• Rear antenna connectors and micro audio and power adapter.

Frequency ranges	B12: 470÷800 + 823÷832 + 925÷937.5 + 941÷960 MHz (EU/KR/US) B13: 470÷800 MHz + 806÷810 MHz + 1240÷1260 MHz (JP) B14: 470÷800 + 961÷1000 + 1044÷1076 + 1104÷1154 MHz (UK DME) B1: 470 ÷ 800 + 961÷1000 + 1045÷1075 MHz (UK) B2: 470 ÷ 800 + 823÷832 + 941÷960 MHz (USA/EU) B3: 470 ÷ 800 + 806÷809 + 1240÷1260 MHz (JP) B5: 470 ÷ 800 + 462÷465 + 806÷810 MHz (JP)
Switchable channels	2400 user programmable frequencies, organized in 40 groups of 60 channels
Switching-window	up 790 MHz
Frequencies	microprocessor controlled frequency synthesizer circuit, with 5 kHz minimum step. The frequencies can be easily PC reprogrammed with USB C or Bluetooth 5 (long range)
Frequency error	< ± 2.5 ppm, in the rated temperature range
Modulation	FM mono, wideband or narrowband IFB (SW selectable)
Peak deviation	±54 kHz (wideband), ± 40 kHz (narrowband)
Antenna input impedance	50 ohm sma type (SWR < 1:2; typ. 1:1.4)
Sensitivity	2 μV ( 6 dBμV, -101 dBm), for SND/N > 58 dB; in the whole switching-window*
Amplitude response	< 0.5 dB (for RF input signal:6 dBµV ÷ 100 dBµV)
Adjacent chan. selectivity	> 80 dB typical (for channel spacing ≥ 400 kHz)
Spurious emissions	< 2 nW (typical = 0.1 pW)
Noise Reduction system	ENS (for live application), compatible with MTP60, MTP61, MTH610 FLAT (for audio measurement), compatible with MTP60 ENR / ENR-1.2 (noise optimized), compatible with MTP40S, MTP41S, MTP51, MTH410, MTB40S ENC / ENC-1.2 (voice optimized), compatible with MTP40S, MTP41S, MTP51, MTH410, MTB40S Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable
AF bandwidth	30 Hz ÷ 20 kHz (wideband), 30 Hz ÷ 17 kHz (narrowband)
Frequency response	± 1 dB in the 30 Hz ÷ 20 kHz range (wideband), ± 1 dB in the 30 Hz ÷ 17 kHz (narrowband)
Distortion	0.3 % typical
SND/D ratio (Analogue)	120 dB typical*
SND/D ratio (Digital)	> 125 dB typical
Audio output	Electronically balanced on 5 pin mini-XLR Female connector analogue or digital (SW selectable)
Digital sample rate	AES3 @ 48 kHz
Monitor output	headphone 3.5 mm jack socket
Managing interface	USB C, Bluetooth 5 (long range)
LEDs	2 multicolour RGB LEDs to easy indicates Power & Bluetooth 4 multicolour RGB LEDs to easy indicates the audio status of the 4 RX
Display	OLED 128x64 (white)
Powering	- External = 6 ÷ 18 Vdc (3 W max) - Autonomous. = with optional BCA 54 Battery Module
Power consumption	3 Watt max (with 4 active receivers), 2 Watt max (with 2 active receivers)
Temperature range	-10 ÷ +55 °C
Dimensions	104 x 87,6 x 25 mm (H x W x D)
Weight	230g
	*RMS value, 22 Hz / 22 kHz, unweighted

470-800 823-832 925-937,5 941-960MHZ